不銹鋼卷簾門其實大家都不會陌生，在街上到處都可以看見，一般在街上的門面上就是安裝的這種不銹鋼卷簾門。這種門安裝比較簡單，時間快所以很多業主都會選擇這種門，下面濟南電動卷簾門安裝維修人員來講講不銹鋼卷簾門一次擠壓成形的過程，需要注意以下事項：

Stainless steel rolling shutter doors are actually familiar to everyone, and can be seen everywhere on the street. Generally, this type of stainless steel rolling shutter door is installed on the facade of the street. This type of door is relatively simple to install and takes a long time, so many owners choose this type of door. Below, the installation and maintenance personnel for Jinan electric rolling shutter doors will explain the process of one-time extrusion forming of stainless steel rolling shutter doors. The following precautions need to be noted:

1.材料質量：要保證所選用的不銹鋼板材質量良好，表面光滑無劃痕，無明顯的鋼板厚薄差異。

1. Material quality: It is necessary to ensure that the selected stainless steel plate has good quality, smooth surface without scratches, and no obvious differences in steel plate thickness.

2.模具設計：要選用合適的模具，且設計合理。模具應考慮到鋼板的變形情況，不能出現過于復雜的幾何形狀，避免出現拉伸變形等問題。

2. Mold design: Suitable molds should be selected and designed reasonably. The mold should consider the deformation of the steel plate and avoid overly complex geometric shapes to avoid problems such as tensile deformation.

3.環境條件：擠壓成形時需要控制好環境條件，避免溫度過高或過低，以及空氣中濕度過大等情況對擠壓成形的影響。

3. Environmental conditions: During extrusion forming, it is necessary to control the environmental conditions well to avoid the impact of high or low temperature, as well as high humidity in the air on the extrusion forming.

4.潤滑劑：在擠壓成形過程中需要涂抹潤滑劑，以降低表面摩擦，減少不銹鋼板材變形，達到更好的擠壓效果。

4. Lubricant: During the extrusion forming process, lubricant needs to be applied to reduce surface friction, reduce deformation of stainless steel plates, and achieve better extrusion results.

5.操作技巧：擠壓成形時需要控制好加壓力度和速度，以及板材的位置，避免出現偏移或變形等問題。

5. Operating skills: During extrusion forming, it is necessary to control the pressure and speed, as well as the position of the sheet, to avoid problems such as deviation or deformation.

6.質量檢驗：擠壓成形后需要對成品進行質量檢驗，檢測尺寸、平直度、表面質量等指標，以保證產品質量。

6. Quality inspection: After extrusion forming, it is necessary to conduct quality inspection on the finished product, testing dimensions, flatness, surface quality and other indicators to ensure product quality.

總之，要保證不銹鋼卷簾門一次擠壓成形的過程順利進行，需要嚴格按照上述事項進行操作，確保產品質量達到要求。更多事項就來我們網站http://luoboyy.com咨詢！

In short, to ensure the smooth extrusion process of stainless steel rolling shutter doors, it is necessary to strictly follow the above procedures to ensure that the product quality meets the requirements. For more information, come to our website http://luoboyy.com consulting service