手動卷簾門安裝步驟介紹

來源：http://luoboyy.com/  發布時間：2024-04-23 09:00:55

手動卷簾門安裝介紹

Introduction to the installation of manual roller shutter doors

手動卷簾門構成：中柱、上罩、卷軸、卷簾門葉片、導軌。

Manual roller shutter door composition: center pillar, upper cover, scroll, roller shutter door blades, guide rail.

工具準備：老虎鉗，沖擊電鉆、手手電鉆、電焊機、切割機、螺絲刀、錘子、線墜、水平尺等。材料準備：中柱、上罩、卷軸、卷簾門葉片、導軌。

Tool preparation: pliers, impact drill, hand drill, welding machine, cutting machine, screwdriver, hammer, plumb bob, level, etc. Material preparation: center pillar, upper cover, scroll, roller shutter door blade, guide rail.

手動卷簾門安裝步驟

Manual roller shutter door installation steps

1：根據測量出門框的大小以便確定卷簾門的大小，利用的切割工具切割出所需面積大小的卷簾門葉片。

1: Based on measuring the size of the door frame to determine the size of the rolling shutter door, use professional cutting tools to cut the required area of rolling shutter door blades.

2：根據門的寬度，切割好中柱，卷軸，以及導軌的寬度有，根據門的長度切割好門邊框。

2: Cut the width of the center pillar, scroll, and guide rail according to the width of the door, and cut the door frame according to the length of the door.

3：確定好卷簾門的安裝位置，并且利用線墜、水平尺等工具進行測量，，找準水平線和垂直線的位置，并且標注出來。

3: Determine the installation position of the roller shutter door, and use tools such as a plumb line and a level to measure, find the position of the horizontal and vertical lines, and mark them.

4：根據標注好的定位線的位置，開始安裝卷簾門的邊框。

4: According to the marked positioning line, start installing the frame of the roller shutter door.

5：根據卷門機的說明書所提示的方法步驟以及注意事項進行卷簾門機的安裝。將組裝好的卷簾門體固定好，然后將限位器找準位置裝上，并試著運轉。

5: Install the rolling shutter door machine according to the instructions and precautions provided in the manual. Fix the assembled roller shutter door body in place, then locate the limiter and install it, and try running it.

6：進行滑道、手動機構、包箱的安裝。

6: Install the slide, manual mechanism, and packaging box.

7：對卷簾門進行調試，以確保后期的正常運行。

7: Debugging the rolling shutter door to ensure normal operation in the later stage.

通過以上的步驟，一扇經久耐用的手動卷簾門就安裝好啦，其實他的安裝方法也不是那么的困難，掌握了就很簡單。

Through the above steps, a durable manual roller shutter door can be installed. In fact, its installation method is not that difficult, and mastering it is very simple.

手動卷簾門的維修方法

Maintenance methods for manual rolling shutter doors

故障1：卷簾門不能很好地卷成，圓柱裝

Fault 1: The roller shutter door cannot be rolled up well and is installed in a cylindrical shape

維修方法：這種情況可能是彈簧折斷或是彈簧連接帶斷裂行，在維修時只需要更換彈簧吊帶即可。

Repair method: This situation may be caused by a broken spring or a broken spring connection strap. During maintenance, simply replace the spring strap.

故障2：卷簾門門鎖打不開或是鑰匙插不進去

Fault 2: The rolling shutter door lock cannot be opened or the key cannot be inserted

維修方法：這種情況有兩種可能一是門鎖損壞，而是鑰匙孔有污垢導致的堵塞，前一種情況，進行門鎖更換，就一種針對鑰匙空洞進行去污清潔處理即可

Repair method: There are two possible scenarios in this situation: one is that the door lock is damaged, and the other is that the keyhole is blocked due to dirt. In the former case, the door lock should be replaced, while in the other case, the keyhole should be cleaned and cleaned to remove dirt

故障3：卷簾門在開啟的過程中困難，不順暢，發出刺耳的聲音

Fault 3: The rolling shutter door is difficult to open, not smooth, and makes a harsh sound

維修方法：如果卷簾門是可以正常卷上去的，那么在卷簾門維修時就不用考慮卷簾門的彈簧損壞與否，這種情況一般都是卷簾門上的簾片卡子卡住導槽或是簾片變形所致，只要對卷簾門入導槽的槽口處進行維修。以及對卷簾門葉片進行平整級就可以啦。

Repair method: If the rolling shutter door can be rolled up normally, there is no need to consider whether the spring of the rolling shutter door is damaged during maintenance. This situation is generally caused by the clip of the curtain on the rolling shutter door getting stuck in the guide groove or the deformation of the curtain. As long as the groove where the rolling shutter door enters the guide groove is repaired. And just level the blades of the rolling shutter door.

故障4：卷軸運轉困難，開啟過程有反相的阻力

Fault 4: The scroll is difficult to operate and there is resistance in the opposite phase during the opening process

維修方法：這種情況，很可能是卷軸兩端口的潤滑度不夠，與卷簾門葉片產生摩擦導致阻力生成，只需要在卷軸的兩端均勻的涂抹上適量的潤滑有即可。。

Repair method: In this situation, it is likely that the lubrication of the two ends of the scroll is insufficient, causing friction with the rolling shutter door blades and generating resistance. Simply apply an appropriate amount of lubrication evenly on both ends of the scroll..

本文由濟南卷簾門友情奉獻.更多有關的知識請點擊:http://luoboyy.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated by Jinan Roller Shutter Door. For more information, please click: http://luoboyy.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned