電動卷簾門電機溫度出現劇烈升溫的原因有很多，比如電源接觸不良、熔斷器熔斷、過大的電壓誤差和較高的額外工況類型等因素。下面濟南電動卷簾門安裝維修人員為您一一進行分析。

There are many reasons for the motor temperature of electric roller shutter to rise sharply, such as poor power contact, fuse fusing, excessive voltage error, high additional working conditions and other factors. Now the installation and maintenance personnel of Jinan electric roller shutter door will analyze them one by one.

1、由于電源接觸不良，我們只需要掃除即可;如果熔斷器熔斷，我們應立即更換熔斷器;一旦發現電動卷簾門電機的額外電壓和電源電壓誤差大于5%，將對大多數低壓電機造成不利條件。一旦電壓過高，空轉電流將接近正常電壓下的額外電流。

1. Due to the poor contact of the power supply, we only need to clean it; If the fuse is blown, we should replace it immediately; Once it is found that the error between the additional voltage and the power supply voltage of the electric roller shutter motor is greater than 5%, it will cause adverse conditions for most low-voltage motors. Once the voltage is too high, the idle current will be close to the additional current under normal voltage.

此時，我們應調整電動卷簾門電機，使其與電源電壓相匹配;如果問題的原因高于額外工作條件的類型，即不是S1~S10范圍之間或開關頻率過高，我們應要求相關知識人員確定合適的驅動裝置，即使調整電機的額外工況類型，使其符合所需的操作條件。

At this time, we should adjust the motor of the electric rolling shutter door to match the power supply voltage; If the cause of the problem is higher than the type of additional working conditions, that is, it is not between S1 and S10 or the switching frequency is too high, we should ask the relevant knowledge personnel to determine the appropriate driving device, even if we adjust the type of additional working conditions of the motor to make it meet the required operating conditions.

2、電動卷簾門廠家在當前市場上的聲譽是很重要的，選擇可靠的電動卷簾門廠家。

2. The reputation of electric rolling door manufacturers in the current market is very important, and reliable electric rolling door manufacturers should be selected.

3、電動卷簾門電機可以在適當?shù)臅r(shí)間內進行維護。減速器應每六個月少添加一次潤滑油，并定期檢查其它部件。一旦發現問題，應及時更換。在使用過程中，應盡量防止碰撞。

3. The motor of the electric rolling shutter can be maintained in a proper time. The reducer shall be lubricated at least once every six months, and other parts shall be checked regularly. Once problems are found, they should be replaced in time. Collision shall be prevented as much as possible during use.

4、關于電動卷簾門的扭簧，在使用一段時間后，如出現松動情況應及時調緊，需要立即更換。

4. As for the torsion spring of the electric rolling shutter door, if it is loose after a period of use, it should be adjusted in time and replaced immediately.

5、電動卷簾門打開時，力度要適中，開關時速度要均勻。

5. When the electric roller shutter door is opened, the force shall be moderate, and the speed shall be uniform when opening and closing.

當發現電動卷簾門在使用過程中出現開口不靈活或其他異常情況時，應及時查明原因。如果維修人員不能問題，也可以聯系電動卷簾門廠家和供應商提供服務，以便及時電動卷簾門故障問題。關注我們http://luoboyy.com，了解更多事項！

In case of inflexible opening or other abnormal conditions of the electric roller shutter door during use, the cause shall be found out in time. If the maintenance personnel cannot solve the problem, they can also contact the manufacturer and supplier of the electric roller shutter door to provide services, so as to solve the problem of the electric roller shutter door in a timely manner. Follow us http://luoboyy.com , learn more!