6個方面進行電動卷簾門維護保養!
現如今電動卷簾門的使用非常廣泛,日常對于電動卷簾門的保養維護工作非常重要,不僅保證正常其性能,還能增加使用壽命。下面,就有
濟南電動卷簾門安裝維修小編給大家講解下電動卷簾門維護保養的方法。
Nowadays, electric roller shutter doors are widely used. Daily maintenance of electric roller shutter doors is very important, not only to ensure its normal performance, but also to increase its service life. Next, the installation and maintenance editor of Jinan electric roller shutter door will explain the maintenance methods of electric roller shutter door.
1、預留檢修孔
1. Reserved manhole
卷簾門在安裝時卷筒下端做包箱或吊頂時必須設置可拆式活動蓋板,在電動卷門機一側下端必須預留500×500mm可拆檢修孔,以便于日后維修保養。
When installing the roller shutter door, when the lower end of the drum is used as a package box or ceiling, a removable movable cover plate must be set, and 500 must be reserved at the lower end of one side of the electric roller door machine × 500mm removable manhole for future maintenance.
2、清洗卷簾門表面
2. Clean the surface of roller shutter door
卷簾門大多都長期暴露在室外,表面有污漬、灰塵等。還有其他異物可能會進入門的軌道,所以,在日常,應該定期對卷簾門的表面進行清洗,因?yàn)殇X合金有一個的柔韌性,擦拭的時候,建議使用柔軟的干布擦拭。門簾和易銹部位應定期進行防腐、油漆及保養處理。
Most of the rolling shutter doors are exposed to the outside for a long time, with stains and dust on the surface. There are other foreign matters that may enter the entrance track. Therefore, the surface of the roller shutter door should be cleaned regularly in daily life, because aluminum alloy has a flexibility. When wiping, it is recommended to use a soft dry cloth. The door curtain and rust-prone parts shall be subject to regular anti-corrosion, painting and maintenance treatment.
3、定期檢查
3. Regular inspection
檢查電動卷簾門的支位偏差及螺絲松緊情況,檢查皮帶的松緊情況,檢查控制器對電機輸出清潔機箱內部的油污、檢查卷簾門各部件的磨損情況,開關門寬度、速度、制動等情況檢查電壓參數是否正常維修、更換損壞的部件業主還需注重自動門的定期保養與維護,自動門由于受安裝質量及使用環境的影響,使用過程中難免會發生問題。
Check the support deviation of the electric roller shutter door and the tightness of the screws, check the tightness of the belt, check the controller's output of the motor to clean the oil dirt inside the case, check the wear of all parts of the roller shutter door, check the width, speed, braking and other conditions of the door opening and closing, check whether the voltage parameters are normal maintenance, and replace the damaged parts. The owner also needs to pay attention to the regular maintenance and repair of the automatic door, Due to the impact of installation quality and use environment, automatic doors will inevitably encounter problems during use.
4、涂抹潤滑油
4. Apply lubricating oil
使用一段時間后卷簾門操作器轉軸的部分會有摩擦,所以定期的需要涂抹一些潤滑油。這樣可以減少機器之間的摩擦,同時重要的是經常涂抹潤滑油也可以讓卷簾門在升降的時候更加順暢,機械之間的摩擦減少,也有助于零件的使用壽命。
After using for a period of time, there will be friction on the rotating shaft of the roller shutter door operator, so it is necessary to apply some lubricating oil regularly. This can reduce the friction between machines. At the same time, it is important to apply lubricating oil regularly to make the roller shutter door more smooth when lifting and lowering. The friction between machines is reduced, which also contributes to the service life of parts.
5、清理軌道內雜物
5. Clear the sundries in the track
為避免卷簾門在升降是卡頓情況,及時清理電動卷簾門軌道,保持軌道平穩運行,保持室內清潔,以免雜物堆積影響運行。
In order to prevent the roller shutter door from getting stuck during lifting, clean the track of the electric roller shutter door in time, keep the track running smoothly and keep the room clean, so as to avoid the accumulation of sundries affecting the operation.
6、檢查電源開關
6. Check the power switch
檢查卷簾門開關部位的電源問題,開關部位的電路問題是影響整個卷簾門工作的重要一環,如果開關電源電路出現問題,卷簾門的活動自然受到影響,如果判斷錯誤,肆意拆開卷簾門內部機械檢查問題,不僅問題沒有,還會真的因?yàn)椴划?dāng)操作,新增加故障問題。
Check the safety of the power supply at the switch part of the shutter door. The circuit problem at the switch part is an important link that affects the operation of the whole shutter door. If there is a problem with the switch power circuit, the activity of the shutter door will be affected naturally. If the judgment is wrong, arbitrarily open the internal mechanism of the shutter door to check the problem, not only the problem has not been solved, but also the problem will be added due to improper operation.
以上就是小編總結的電動卷簾門維護保養方法,及時定期的保養維護可增加卷簾門的使用壽命。更多相關內容就來我們網站
http://luoboyy.com進行咨詢吧!
The above is the maintenance method of electric roller shutter summarized by Xiaobian. Timely and regular maintenance can increase the service life of roller shutter. Come to our website for more relevant content http://luoboyy.com Consult!