Rolling shutter doors have safety functions. The wind resistance function is widely used and has a broad market prospect. The following Chongqing Rolling shutter Door Factory introduces the composition and structure of rolling shutter doors: The function of rolling shutter doors is determined by different components.

現在，卷簾門的組成部分首要包括自動控制設備。由門結構、聚氯乙烯窗簾、驅動電機、控制系統等組成。在此期間，一些原材料的運用是不同的，其功用是不同的。

Now, the components of roller shutter doors mainly include automatic control equipment. Composed of door structure, PVC curtains, drive motor, control system, etc. During this period, the use of some raw materials varied and their functions varied.

卷簾門扇顫抖：

Rolling shutter door leaf trembles:

或許是由于地下導軌或止擺器有障礙物或磨損。

Perhaps it is due to obstacles or wear on the underground guide rails or swing stops.

或移動吊擺和軌跡磨損或障礙物。

Or move the pendulum and track wear or obstacles.

卷簾門開關速度過慢：

Rolling shutter door switch speed too slow:

控制器速度調整太慢。

The controller speed adjustment is too slow.

電壓異常。

Abnormal voltage.

皮帶或許過度松動。

The belt may be excessively loose.

止動輪與軌跡發生沖突。

The stop wheel conflicts with the trajectory.

怎么正確運用電動卷簾門？

How to use electric roller shutter doors correctly?

合理的提高速度能夠減少動力糟蹋和傳動部件的沖突丟失，也有助于延長變頻器的運用壽命。這能夠根據實際需要設置電動卷簾門的開關速度。

Reasonable increase in speed can reduce power waste and conflict loss of transmission components, and also help extend the service life of frequency converters. This can set the opening and closing speed of the electric roller shutter door according to actual needs.

卷簾門運轉時，制止在下面行走，卷簾門下梁下端制止堆放物品。

When the rolling shutter door is in operation, stop walking below and stop stacking items at the bottom of the lower beam of the rolling shutter door.

卷簾門簾及易銹部位，要定時油漆及防繡保養，制止用重物.硬物沖擊門面。

Rolling shutter doors, curtains, and easily rusted areas should be regularly painted and maintained for rust prevention, and heavy or hard objects should be avoided from impacting the facade.

在卷簾門裝置方位的上端，應有可靠的防火設備。在卷簾門卷筒下端制作包裝箱或天花板時，應設置可拆卸活動蓋板。電動卷簾機一側下端必須預留500×500mm可拆卸修理孔，便于修理。

At the upper end of the rolling shutter door device, there should be reliable fire protection equipment. When making packaging boxes or ceilings at the lower end of the roller shutter door drum, removable movable cover plates should be installed. 500 must be reserved at the lower end of one side of the electric roller shutter machine × 500mm detachable repair hole for easy repair.

電動卷簾門在啟閉中止過程中，應具有隨地中止的功用，不得中止并持續下滑。中山道爾自動門窗提醒，假如下滑間隔大于50mm，應立即仔細檢查和修理卷簾門控制電器和卷簾門機制動器，直正常運轉。

Electric roller shutter doors should have the function of stopping anywhere during the opening and closing process, and should not stop and continue to slide. Zhongshan Daoer Automatic Doors and Windows reminds that if the sliding interval is greater than 50mm, the control electrical appliances and brake of the rolling shutter door should be carefully inspected and repaired immediately until it operates normally.

假如電動卷簾門關閉后簡單自開，既不便利又不，能夠找一塊尺度適宜的強磁鐵，平埋在門框上方約1/4的門高，然后在門扇與門框一致的地方釘一塊鐵皮，防止不銹鋼卷簾門自開。

If the electric roller shutter door simply opens on its own after closing, it is neither convenient nor safe. You can find a strong magnet with a suitable scale, buried about 1/4 of the door height above the door frame, and then nail a piece of iron sheet at the same place as the door leaf and frame to prevent the stainless steel roller shutter door from opening on its own.