因?yàn)榫砗熼T(mén)由端板、卷簾軸、卷簾門電機、傳動鏈、導軌、卷簾門、控制箱等部件組成。卷簾門的上下滑動需要在導軌中實現。如果卷簾門出軌，就會出現卡死現象，容易上下或不能上下。濟南電動卷簾門安裝維修人員提醒您，該現象發生在以下幾種情況：

Because the roller shutter door is composed of end plate, roller shutter shaft, roller shutter motor, drive chain, guide rail, roller shutter door, control box and other components. The sliding up and down of the roller shutter door needs to be realized in the guide rail. If the roller shutter door is derailed, it will be stuck, easy to get up and down or unable to get up and down. Jinan electric roller shutter door installation and maintenance personnel remind you that this phenomenon occurs in the following situations:

1、卷簾門軸管斷裂。

1. The roller shutter shaft tube is broken.

2、卷簾門軸管固定座螺栓松動，使固定座脫落。

2. The bolts of the fixed seat of the roller shutter shaft tube are loose, which makes the fixed seat fall off.

3、卷簾門軸管與固定座螺絲脫落，使軸管固定分離。

3. The screws of the roller shutter shaft tube and the fixing seat fall off, so that the shaft tube is fixed and separated.

4、卷簾門扇的連接脫鉤，或與軸管的固定螺絲松動，使門片脫落。

4. The connection of the roller shutter door leaf is unhooked, or the fixing screw with the axle tube is loose, which causes the door leaf to fall off.

5、門片卡住后，用力拉動，使刀片脫節。務必排除故障以進行維修。

5. After the door plate is stuck, pull hard to make the blade dislocate. Be sure to correct the fault for repair.

預防措施：

Precautions:

1、安裝過程中一定要注意線路的完整性，規范操作，安裝卷簾門。

1. During the installation process, pay attention to the integrity of the line, standardize the operation, and install the roller shutter door.

2、在使用卷簾門時，要注意卷簾門軌道和吊輪不能涂油，否則吊架上的滾輪會滑動，導致門體相撞。

2. When using the roller shutter door, pay attention that the roller shutter door track and the lifting wheel cannot be oiled, otherwise the roller on the hanger will slide, causing the door body to collide.

3、電動卷簾門脫軌脫鉤也可能是線路問題?？赡苁强刂凭€路中的某條線路連接不正確，也可能是在搬運過程中線路斷了。在檢查其他項目之前，優先檢查并排除電路問題。例如，檢查電機引線和繼電器的插頭是否因振動而脫落，導致故障。

3. The derailment and decoupling of the electric roller shutter door may also be a line problem. It may be that one of the control lines is not connected correctly, or it may be that the line is broken during transportation. Before checking other items, check and eliminate circuit problems first. For example, check whether the motor lead and relay plug fall off due to vibration, resulting in failure.

此外，還有許多注意事項需要注意，例如：

In addition, there are many matters needing attention, such as:

卷簾門電機的選購也是比較重要的一環。切記不要覺得提升力不夠，因?yàn)榫砗熼T(mén)電機的承載能力會隨著時間的推移而逐漸降低實際的提升效果，所以盡量選擇材料。超過窗簾的實際升力。

The selection and purchase of roller shutter motor is also an important part. Remember not to think that the lifting force is not enough, because the bearing capacity of the roller shutter motor will gradually reduce the actual lifting effect over time, so try to select materials. Exceeds the actual lift of the curtain.

卷簾門具有防推裝置，防止門體被強行推擠，具有防盜的特點。后卷簾卷起在車門上部，節省車庫內部空間，不會將泥、雨、雪等雜物帶入車庫，美觀大方

The rolling shutter door is equipped with an anti-thrust device to prevent the door body from being pushed forcibly, and has the characteristics of security and anti-theft. The rear roller shutter is rolled up on the upper part of the door, saving the interior space of the garage, and will not bring mud, rain, snow and other debris into the garage, which is beautiful and generous

選擇卷簾門時，要觀察卷簾門是否可以手動操作，還要保證手動操作的靈活性和穩定性。為了保證卷簾門的，我們要求卷簾門具有雙面自鎖功能，并保證卷簾門不會因慣性而自由滑動。卷簾門的結構要足夠精密，散熱要符合要求。有選購需求就來聯系我們http://luoboyy.com吧！

When selecting the roller shutter door, observe whether the roller shutter door can be operated manually, and ensure the flexibility and stability of the manual operation. In order to ensure the safety of the roller shutter door, we require the roller shutter door to have a double-sided self-locking function and ensure that the roller shutter door will not slide freely due to inertia. The structure of the rolling shutter door should be precise enough and the heat dissipation should meet the requirements. Contact us if you need to buy http://luoboyy.com Come on!