濟南防火卷簾門安裝維修人員提醒您，當防火卷簾門無法啟動或者是啟動較慢的時候,我們先要檢查電動機是否能夠正常運行工作,若不能則更換電動機。那你知道有關常見的使用問題，如：

Jinan fire shutter door installation and maintenance personnel remind you that when the fire shutter door cannot be started or starts slowly, we should first check whether the motor can operate normally, if not, replace the motor. Then you know the common questions about participation, such as:

防火卷簾門半夜自動開

The fire rolling shutter door opens automatically at midnight

可能該電動移門安裝了雷達感應器。夜間雷達碰到感應物，就自動打開了。建議夜間不使用卷簾門的情況下，建議是鎖死，并切斷電源。

The electric sliding door may be equipped with a radar sensor. At night, the radar automatically turns on when it encounters a sensor. It is recommended to lock and cut off the power when the rolling shutter door is not used at night.

防火卷簾門能不能改成手動的

Can the fire rolling shutter be changed to manual

可以，進入行程，進行模式設置，改為手動。

Yes, enter the stroke and set the mode to manual.

防火卷簾門按一下動一下

Press and move the fire shutter door

通常是因?yàn)槟Ｊ皆O(shè)置為“點動”模式了，可以重新進入行程設置，對模式進行修改。修改為“手動”或者“自動”

Usually, because the mode is set to "inching" mode, you can re-enter the travel setting to modify the mode. Change to "Manual" or "Automatic"

防火卷簾門向上不好使

The fire shutter door is hard to operate upward

排除電機問題，通常考慮控制鍵壞了，需要打開控鍵盒面板，進行檢修。

To eliminate the motor problem, it is usually considered that the control key is broken, and the panel of the control key box needs to be opened for maintenance.

電動卷閘門一邊高一邊低

One side of the electric rolling gate is high and the other side is low

排除按裝時沒裝好的可能，或者有硬物阻塞。需要檢查一下卷簾行進的通道。

It is ruled out that the installation is not completed or there are hard objects blocking. It is necessary to check the passage of the roller shutter.

濟南防火卷簾門安裝維修人員就為您講解這個問題到這里了，您還有什么疑惑就來我們網站http://luoboyy.com進行咨詢了解吧！

Jinan fire shutter door installation and maintenance personnel will explain this problem to you here. If you have any doubts, please come to our website http://luoboyy.com Consult and understand!