現在買車的人越來越多了，但是要是買了車卻不準備一個車庫門那就有點說不過去了，也很不方便。那么您知道車庫門問題的幾個檢查維修方式嗎？下面濟南車庫門安裝維修人員為您解析。

There are more and more people buying cars now, but it is a bit unreasonable and inconvenient to buy a car without a garage door. Do you know several inspection and maintenance methods for garage door problems? Next, Jinan garage door installation and maintenance personnel will analyze for you.

1、檢查車庫內部的金屬軌道。查看將軌道固定到墻壁的安裝支架。如果支架松了，請擰緊螺栓或螺釘。將車庫門關上，在車庫內部檢查軌道是否有凹陷、彎曲或變平的地方。如果有任何損壞之處，請用橡皮錘，或用一塊廢木料墊著錘子敲打這些地方。如果軌道嚴重損壞，您須更換。

1. Check the metal tracks inside the garage. Look at the mounting bracket that secures the rail to the wall. If the bracket is loose, tighten the bolts or screws. Close the garage door and check the tracks inside the garage for dents, bends or flattening. If there is any damage, please use a rubber hammer or use a piece of waste wood to cushion the hammer to hit these places. If the track is seriously damaged, you must replace it.

2、用水平儀檢查軌道，確保軌道在同一水平線上。水平軌道應當略向車庫后部傾斜，如果是卷簾門，軌道的縱向部分應垂直。在車庫的墻壁上，兩條軌道須處于同一高度。如果軌道沒有準確對齊，請將固定安裝支架的螺釘或螺栓擰松，但不要把它們取下來，然后小心地敲打軌道，使它們移動到適當的位置。用水平儀重新檢查軌道，確保它們處于正確的位置;然后將安裝支架上的螺釘或螺栓擰緊。

2. Check the track with a level gauge to ensure that the track is on the same horizontal line. The horizontal track should lean slightly towards the rear of the garage. In the case of rolling shutter doors, the longitudinal part of the track should be vertical. On the wall of the garage, the two tracks must be at the same height. If the rails are not correctly aligned, loosen the screws or bolts that fix the mounting bracket, but do not remove them, and then carefully knock the rails to move them to the proper position. Recheck the tracks with a level to ensure that they are in the correct position; Then tighten the screws or bolts on the mounting bracket.

3、用高濃度家用清潔劑清洗軌道，去除污垢和硬化的油脂。將轉軸清洗干凈，然后將軌道和轉軸擦干。

3. Clean the track with a high concentration household cleaner to remove dirt and hardened grease. Clean the shaft, and then wipe the track and shaft dry.

4、將石墨粉撒在軌道上，將家用潤滑油或硅樹脂噴在轉軸上，或者在軌道和轉軸上噴灑車庫門專用潤滑油噴劑，以起到潤滑作用。如果有滑輪，請您使用和用在轉軸上的相同的潤滑劑潤滑。

4. Sprinkle graphite powder on the track, spray household lubricating oil or silicone resin on the shaft, or spray special lubricating oil spray for garage door on the track and shaft for lubrication. If there are pulleys, please use the same lubricant used on the shaft.

以上這些就是車庫門問題的幾個檢查維修方式的相關內容分享，希望能給大家?guī)韼椭?。如果您喜歡以上內容，不妨關注我們網站http://luoboyy.com！

These are the contents of several inspection and maintenance methods for garage door problems. I hope they can help you. If you like the above content, please follow our website http://luoboyy.com ！