大家常見到濟南電動卷簾門安裝維修廠家的技術人員安裝電動卷簾門都非常的，其實說自己安裝電動卷簾門呢也并不是很困難的事，只要在確保自己的的情況下，把門體根據說明說來一步步進行安裝，其實安裝電動卷簾門也并非難事，接下來就和小編一起來往下看。

The technicians from Jinan Electric Roller shutter Installation and Maintenance Factory are very professional in installing electric Roller shutter. In fact, it is not very difficult to install electric Roller shutter yourself. As long as you ensure your own safety, you can install the door body step by step according to the instructions. In fact, it is not difficult to install electric Roller shutter. Let's look down together with Xiao Bian.

1.先畫線，以工程圖紙為基本，在依據要去，在要安裝的門坎上開展畫線作標識，畫好就逐漸測算其卷簾門的規格，挑選出合適的卷簾門。要留意的是，畫線時門框高度要比門板高度高。

1. Draw lines first. Based on the engineering drawings, draw lines on the door sill to be installed for identification according to the requirements. After drawing, gradually calculate the specifications of its Roller shutter door and select a suitable Roller shutter door. It should be noted that when drawing lines, the height of the door frame should be higher than the height of the door panel.

2.固定不動門框，固定門框要先把以前的固定不動板給拆下來，且在洞邊兩邊的路面上預埋凹形槽，把門框鐵腳與預埋件的不銹鋼板件電焊焊接在其中，在使用混泥土將其封牢。

2. Fix the fixed door frame. To fix the door frame, first remove the previous fixed fixed plate and embed concave grooves on the road surface on both sides of the hole. Weld the iron feet of the door frame and the stainless steel plates of the embedded parts by electric welding, and seal them tightly with concrete.

3.將卷簾門安裝到門框里就行，但是在安裝使用時要留意，上邊的聯接一定要密切、堅固，以防應用會產生生產事故。而兩邊聯接時則要與墻面產生一個總體，并確保密閉性，隨后擦抹油漆。

3. It is OK to install the Roller shutter into the door frame, but pay attention to the connection between the upper side and the door frame when installing and using it, so as to prevent the application from causing safety production accidents. When connecting the two sides, it is necessary to form a whole with the wall and ensure confidentiality, and then apply paint.

4.在安裝完成后需要多次調試來確保我們的電工卷簾門無異常，如果有發現問題就需要及時找到問題從而，如果在多次的調試中沒有發現問題，那么電動卷簾門就可以正常使用運行了。

4. After installation, we need to debug for many times to ensure that our electrician's Roller shutter is normal. If we find any problem, we need to find the problem in time to solve it. If we do not find any problem in many debugging, then the electric Roller shutter can be used normally.

建議各位在安裝電動卷簾門過程中需要多注意，如果在安裝過程中遇到了確實不了的問題，還希望能聯系廠家進行上門安裝。更多相關事項就來我們網站http://luoboyy.com咨詢！

It is recommended that you pay more attention to safety during the installation of electric Roller shutter. If you encounter problems that cannot be solved during the installation process, you also hope to contact the manufacturer for door-to-door installation. For more related matters, come to our website http://luoboyy.com consulting service